Sames | 04F240 에어스프레이 Flowmax® 페인트 펌프

서술

유지보수가: FLOWMAX® 공업 기술
습기에 민감하고 연마재에 적합하도록 설계됨
수명 연장

► 기술 책자

성능:

♦유통 중인 여러 개의 총을 먹일 수 있는 높은 출력
♦ 최대 4,000ccps의 재료에 대한 높은 흡입력
♦ 24/7 연속 사용 가능한 터보 공기 모터

생산력:

♦ FLOWMAX® Bellows 기술로 인해 윤활유 컵 없음 - 건 밀봉 및 분진 없음
♦수분 감지 촉매 & UV 제품에 이상적

지속 가능성:

♦ 트리플 크롬 피스톤 & 실린더, 스테인리스 스틸 볼 & 카바이드 시트 등 장기 사용
♦ 부품이 거의 없는 깔끔한 디자인. 반전 시스템을 통해 지속적인 재료 제공을 위한 신속한 전환 제공
♦ 벨로즈 수명 10,000,000 사이클 - 최대 8년

높은 신뢰성 - 유체 섹션이 대기에서 분리됨

기술 자료표

명칭	수치	단위
압력비	4 : 1
최대 유체 압력	24 (347.8)	bar (psi)
최대 공기 압력	6 (87)	bar (psi)
최대 온도	50 (122)	°C (°F)
씰링 패킹 벨로우즈 폴리에틸렌	♦
실린더	240 (8.1)	cc (oz)
사운드 등급	< 82	dBa
30 사이클/mn에서 유체 출력	7.2 (1.9)	l/min (gal/mn)
자유 유량	14.4 (3.8)	l/mn (gal/mn)
4bar에서 30Cycles/mn의 공기 소비량(60psi)	10.3 (6.1)	m³/h (cfm)
공기 흡입구	F 3/4" BSP
유체 배출구	M 3/8" NPS
유체 흡입구	M 26x125
제품 리터당 주기 수	4
씰링패킹 상·하부 GT 폴리에틸렌	♦
높이	104 (40.9)	cm (in)
너비	40 (15.7)	cm (in)
깊이	21 (8.3)	cm (in)
습식 부품 스테인리스 스틸	♦
무게	27 (59.5)	kg (lbs)

설비

Designation	Setup	Atomization air regulator	Air regulator fluid pressure	Suction rod	Drain rod Ø6x8	Pump output filter	Part number
04F240 BARE PUMP	Bare	-	-	-	-	-	151795000
04F240 WALL-MOUNTED	Wall-Mounted	-	♦	-	-	-	151795100
04F240 WALL-MOUNTED WITH FILTER	Wall-Mounted	-	♦	♦	♦	♦	151795200
04F240 CART-MOUNTED WITH FILTER	Cart-Mounted	-	♦	♦	♦	♦	151795400

부속

Designation	Details		Part number
DRAIN ROD D16 S/S CONNECTOR 18X125	SST Drain rod with Ø16 hose and fitting 18x125	1	049596000
Suction rod diam 25 (Fittings 26*125)	SST Suction rod with Ø25 hose - fittings 26x125 - 600mm length	2	149596150
SCUTION ROD D25 (FITTINGS 26x125) FOR 200 L DRUM	SST Suction rod with Ø25 hose - fittings 26x125 - 1000mm length recommended for 200L drums	3	149596160
Bracket w. straps	Reinforced bracket (with straps) to mount the pump on a wall	4	056100199
TROLLEY 2 ARMS	Spare cart (2 handles)	5	051221000

기술

Flowmax® 재료 공급 기술

Flowmax® 기술은 누출이 없는 펌프의 총 밀폐를 보장한다.

GT sealing for abrasive paint sealing on pumps

GT 밀봉

이 기술은 펌프 피스톤의 수명을 연장하기 위해 설계된 새로운 세대의 씰링을 나타낸다.

2 balls technology for liquid material feeding

2 볼

2볼 펌프 기술은 대부분 도료 부분에 사용된다.1구는 재료를 빨아들이는 데 사용하고 1구는 재료를 공급하는 데 사용한다.

Triple Chrome Layer

이것은 매우 높은 지속가능성을 위한 특별한 치료법이고 펌프의 유체부분의 피스톤에 적용된다.

파일

Select all documents

Catalog Airspray Range Sames (English version)

Catalog airspray range sames kremlin

Format : application/pdf
Size : 14Mo

Select the document

General Catalog (only for North American market) Sames

General Catalog North America

Format : application/pdf
Size : 6Mo

Select the document

Instruction manuals

Select all documents

재료

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

CARC Water-Based

Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.

CARC Epoxy Multi-Component

Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

Moisture-Sensitive Polyurethane Multi-Component

Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material 100% Solid

UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.

UV Material Water-Based

Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

UV Material Polyurethane Multi-Component

The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.

UV Material Polyurethane

The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

산성 촉매 폴리우레탄 다성분

멀티 컴포넌트 에폭시산 촉매(AC) 시스템은 건조/경화를 위해 경화제 또는 촉매가 필요하며, 화학 반응이 완료될 때까지 바인더의 경화 과정을 시작하고 유지함으로써 작동한다. 용제는 화학반응이 일어나기 전에 옻칠, 페인트 또는 필러로 마무리된다. 촉매는 습기에 민감하며 Flowmax® 기술 보호가 필요하다.

산성 촉매 에폭시 다중 성분

Multi-Component Epoxy Acid Catalyzing (AC)시스템은 건조/경화를 위해 경화제 또는 촉매가 필요하며, 화학 반응이 완료될 때까지 바인더의 경화 과정을 시작하고 유지함으로써 작동한다. 용제는 화학반응이 일어나기 전에 옻칠, 페인트 또는 필러로 마무리된다. AC 제품의 경화 시간은 열을 가하면 극적으로 빨라질 수 있다.

Metallic Epoxy

The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.

Metallic Water-Based

Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.