FPro G Manual Airspray Spray Gun Gravity
- High spraying quality
- Modular gun for a large range of application
- Ergonomic and robust design
The FPro G from Sames is the new star in the world of low pressure gravity-feed spray guns. This new technological gravity gun, available in HVLP, LVLP and Conventional technologies, is the best choice to ally high finishing quality and comfort of use. Once more, Sames avails of its Vortex technology to improve the transfer efficiency and the homogeneity of the spray pattern. More than a simple spray gun, the FPro G gathers high spraying quality and low air consumption to fit all the applications and requirements of professional painters.
Sames engineers have particularly worked on the FPro G gun body to be well balanced, ergonomic and light. The whole conception of the FPro G makes it perfect for an effortless spraying experienceand an easy cleaning after your daily work. This new spray gun introduces also a brand new feature which leads to the lightest trigger pull on the market: the magnet assisted trigger (MAG-trigger). This technology enhanced once more the fact that Sames cares about the painters comfort.
Compatible with the SMART Cups and the GSP kit, the FPro G fits all the painters' needs. The large range of accessories offers a modular gun for all your needs !
With the FPro gravity-feed version, the FPro manual range is now complete to ensure professional finishing for all ! Sames offers a large range of spray guns and accessories for all applications in the high finishing industrial markets.
|최소 유체 배출구||105 (3.6)||cc/min (oz/min)|
|최대 공기 압력||6 (87)||bar (psi)|
|최대 유체 온도||50 (122)||°C (°F)|
|공기 흡입구||M 1/4 NPS/BSP compatible|
|광택 구조 알루미늄 본체||♦|
|공기 소비 CONV (2,5~3,5bar / 36 - 51psi에서)||23.8 (14)||m3/h (cfm)|
|공기 소비량 HVLP/LVLP (1,5~2,5bar / 22~36psi)||21.3/14.9 (12.5/8.8)||m3/h (cfm)|
|무게||445 (15.7)||g (oz)|
|Cup capacity||0.6 (0.16)||l (gal)|
|Designation||Technology||Nozzle size||Fluid output||Part number|
|FPRO G HVLP-12-Lvb||HVLP||1.2||105 cc/mn (3.6 oz/mn)||136797412|
|FPRO G HVLP-13-Lvb||HVLP||1.3||126 cc/mn (4.3 oz/mn)||136797413|
|FPRO G HVLP-14-Lvb||HVLP||1.4||150 cc/mn (5.1 oz/mn)||136797414|
|FPRO G HVLP-15-Lvb||HVLP||1.5||170 cc/mn (5.7 oz/mn)||136797415|
|FPRO G HVLP-18-Lvb||HVLP||1.8||200 cc/mn (6.8 oz/mn)||136797418|
|FPRO G HVLP-22-Lvb||HVLP||2.2||280 cc/mn (9.5 oz/mn)||136797422|
|FPRO G LVLP-12-Mvb||LVLP||1.2||105 cc/mn (3.6 oz/mn)||136790312|
|FPRO G LVLP-13-Mvb||LVLP||1.3||126 cc/mn (4.3 oz/mn)||136790313|
|FPRO G LVLP-14-Mvb||LVLP||1.4||150 cc/mn (5.1 oz/mn)||136790314|
|FPRO G LVLP-15-Mvb||LVLP||1.5||170 cc/mn (5.7 oz/mn)||136790315|
|FPRO G LVLP-18-Mvb||LVLP||1.8||200 cc/mn (6.8 oz/mn)||136790318|
|FPRO G LVLP-22-Mvb||LVLP||2.2||280 cc/mn (9.5 oz/mn)||136790322|
|FPRO G CONV-12-Mvb||CONV||1.2||105 cc/mn (3.6 oz/mn)||136794312|
|FPRO G CONV-13-Mvb||CONV||1.3||126 cc/mn (4.3 oz/mn||136794313|
|FPRO G CONV-14-Mvb||CONV||1.4||150 cc/mn (5.1 oz/mn)||136794314|
|FPRO G CONV-15-Mvb||CONV||1.5||170 cc/mn (5.7 oz/mn)||136794315|
|FPRO G CONV-18-Mvb||CONV||1.8||200 cc/mn (6.8 oz/mn)||136794318|
|FPRO G CONV-22-Mvb||CONV||2.2||280 cc/mn (9.5 oz/mn)||136794322|
|Gravity cup FPro G 0||139790100|
|GSP kit with cup||139798200|
|Pack of Smart Cups - 750mL - filter 125µm (x48)||138790112|
|Pack of Smart Cups - 750mL - filter 190µm (x48)||138790113|
|Adaptor Smart Cups FPro G, M22 G, S3 G||138790001|
|Trigger FPro G||129790907|
|Seal kit FPro G||129790901|
|Maintenance kit FPro G||129790904|
|Rear line assembly FPro G||129790905|
|TIP + NEEDLE 12 - FPRO G||131799912|
|TIP + NEEDLE 13 - FPRO G||131799913|
|TIP + NEEDLE 14 - FPRO G||131799914|
|TIP + NEEDLE 15 - FPRO G||131799915|
|TIP + NEEDLE 18 - FPRO G||131799918|
|TIP + NEEDLE 22 - FPRO G||131799922|
|Aircap FPRO G CONV-1222-Mvb||132794100|
|Pack Anti-drip diaphragm FPro G (x5)||139790105|
|Aircap FPRO G LVLP-1222-Mvb||132790200|
|Aircap FPRO G HVLP-1222-Lvb||132790100|
The MAG-trigger technology which is now available on the FPro G will reduce the trigger pull effect for a more comfortable spraying experience.
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.
Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.
UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.
The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.