Sames | A35 HPA 자동 에어스프레이 스프레이 건

서술

높은 프로덕션 에어스프레이 속도에 대한 답변
고점도 소재에 맞게 설계됨
모듈식 디자인과 높은 신뢰성

►기술책자

성능

♦ 유체 출력의 인덱스 노브 조정을 통해 정확한 출력 정확성 보장
♦ 고품질 표면 및 팬 패턴 최적화를 제공하는 팬 폭 제어
♦ 단단한 팬 제어 기능을 제공하는 에어캡의 정밀 가공

생산성

♦ 오버 스프레이 감소로 ROI(투자 수익) 및 재료 비용 절감 효과 제공
♦ 0-90° 색인된 에어캡으로 팬 패턴의 쉽고 빠른 재조정 가능
♦ 간편한 조립으로 다운타임 감소
♦ 자동 시스템에 쉽게 장착할 수 있는 측면 출력
♦ 로봇 애플리케이션에서 쉽게 설정할 수 있는 후면 출력
♦ 순환계통 압력손실을 줄이기 위해 베이스에서만 순환

지속가능성

♦ 자동 조정 카트리지에 의한 보장 니들 밀봉
♦ 스테인리스강 또는 처리된 스테인리스강 내 경질 처리된 바늘 및 습식 부품의 수명
♦ 과분사량 감소로 살수부스 유지관리 감소
♦ 브래스 니켈 도금 에어캡으로 수성 소재에 대한 높은 저항성 보장

기술 자료표

명칭	수치	단위
최대 유체 압력	6 (87)	bar (psi)
최대 공기 압력	6 (87)	bar (psi)
추천 원자화 공기압력	3 to 5	bar (psi)
공기 소비량	24 to 44	m3/h (cfm)
트리거 공기 압력	3 (44)	bar (psi)
최대 유체 온도	50 (122)	°C (°F)
스테인리스 스틸, PTFE 습식 부품	♦
알루미늄 본체	♦
유체 흡입구	2 x F 1/4 NPS, 6-8 hose with fitting supplied
파일럿 공기 흡입구	F 1/8 NPS, 4-6 hose fitting supplied (T2x4 Cefla)
분무식 공기 흡입구	F 1/4 NPS, M 1/4 BSP with fitting supplied
빠른 피팅 장착 파일럿 에어	♦
무게	497 (gun only)	g (oz)
ATEX Certification	II2G Ex h IIB T6 Gb X

설비

Designation					Part number
A35 hpa					129305000
A35 hpa					135305101
A35 hpa					135305102
A35 hpa					135305103
A35 hpa					135305104
A35 hpa					135305105
A35 hpa					135305106
A35 hpa					135305201
A35 hpa					135305202
A35 hpa					135305203
A35 hpa					135305204
A35 hpa					135305205
A35 hpa					135305206
A35 hti / hvlp					129300070
A35 hti / hvlp					129300050
A35 hti / hvlp					129300060
A35 hpa					135305001
A35 hpa					135305002
A35 hpa					135305003
A35 hpa					135305004
A35 hpa					135305005
A35 hpa					135305006
A35 hpa					135305301
A35 hpa					135305302
A35 hpa					135305303
A35 hpa					135305304
A35 hpa					135305305
A35 hpa					135305306

부속

Designation					Part number
Projector					031305001
Projector					031305002
Projector					031305003
Projector					031305004
Projector					031305005
Projector					031305006
Needle					033300100
Needle					033300200
Aircap					132305200
Nozzle					134130050
Nozzle					134130100
Nozzle					134130200
Nozzle					134130300
Nozzle					134130600
Nozzle					134130700
Nozzle					029253002
Nozzle					049351000
Nozzle					049351700
Nozzle					049351705

부품

Designation					Part number
Nozzle					129300901

기술

에어스프래이 HPA™

HPA는 고출력 원자화를 제공하는 에어스프레이 기술이다.

파일

Select all documents

Leaflet A35 Automatic Airspray Spray Gun (English version) Sames

Format : application/pdf
Size : 421Ko

Select the document

Catalog Airspray Range Sames (English version)

Catalog airspray range sames kremlin

Format : application/pdf
Size : 14Mo

Select the document

General Catalog (only for North American market) Sames

General Catalog North America

Format : application/pdf
Size : 6Mo

Select the document

Instruction manuals

Select all documents

재료

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Water-Based Stains

Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.

Solvent-Based Stains

A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.

CARC Water-Based

Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.

CARC Epoxy Multi-Component

Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Metallic Epoxy

The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.

Metallic Water-Based

Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.