EasyPump
Gear Pump for Flow management
Accurate Dosing
Improved Cleaning
Easy Maintenance
설명
기술 데이터
장비
키트
문서 및 미디어
기술
시장
성능
Performance
1 Specifically designed to reduce the gap in gear assembly and give accurate flow for high finishing results
2 Efficient flushing thanks to the bypass block at the rear of the pump
♦ Limited amount of dead zones to allow a faster and easier
Productivity
2 During flushing and loading there is a bypass function around the gearwheels, in parallel to an internal flushing of gearwheels and shafts
3 Same interface between all the pumps for unlimited compatibility
♦ Wide range of outputs from 1,2 to 10cc per revolution
Sustainability
4 Robust transmission shaft, treated and maintained by several bearings and an axial stop
♦ All parts in contact with product are in Stainless Steel
♦ The cleaning process helps to lubricate rotating parts
♦ Maintenance kits (including seals) are dedicated for each type of gearpump
생산성
2 During flushing and loading there is a bypass function around the gearwheels, in parallel to an internal flushing of gearwheels and shafts
3 Same interface between all the pumps for unlimited compatibility
♦ Wide range of outputs from 1,2 to 10cc per revolution
지속가능성
4 Robust transmission shaft, treated and maintained by several bearings and an axial stop
♦ All parts in contact with product are in Stainless Steel
♦ The cleaning process helps to lubricate rotating parts
♦ Maintenance kits (including seals) are dedicated for each type of gearpump
| 설명 | 값 |
|---|---|
| products_air_inlet | 2.7x4 |
| products_certification | II 2 G Ex h IIA T4 Gb |
| products_maximum_air_pressure_bar | 6 |
| products_maximum_air_pressure_psi | 90 |
| products_maximum_fluid_output_cc_min | 800 |
| products_maximum_fluid_output_cfm | 0.03 |
| products_maximum_material_pressure_bar | 15 |
| products_maximum_material_pressure_psi | 220 |
| products_minimum_output_cc_min | 30 |
| products_minimum_output_oz_min | 1 |
| products_nominal_maximum_rotation_speed | 80 rpm |
| products_pump_type | 기어 펌프 |
| products_pumping_technology | 기어 펌프 |
| 설명 | 부품 번호 |
|---|---|
| Pump EasyPump 10CC (Equipped with bypass bloc) | 270000161 |
| Pump EasyPump 6CC (Equipped with bypass bloc) | 270000160 |
| Pump EasyPump 4.5CC (Equipped with bypass bloc) | 270000159 |
| Pump EasyPump 3CC (Equipped with bypass bloc) | 270000158 |
| Pump EasyPump 2.4CC (Equipped with bypass bloc) | 270000157 |
| Pump EasyPump 1.2CC (Equipped with bypass bloc) | 270000156 |
| 설명 | 부품 번호 |
|---|---|
| Retrofit kit to install "EasyPump" instead of "H" Pump | 910032532 |
| Retrofit kit to install "EasyPump" instead of "FCG" Pump | 910032530 |
| Retrofit kit to install "EasyPump" instead of "Easyrincing" Pump | 910032528 |
| Retrofit kit to install "EasyPump" instead of "Compact" Pump | 910032527 |
-
product-easypump-gearpump_ko_KR.pdf
