Azur™ 72C160
Airless® Paint Pump
Azur™ range is the recommended line for the protective coatings market. The pump will transfer material without compromising your finish quality whether you are using single component paints, pre-mixed 2K, zinc-rich materials, and other types of coatings.
High finishing protective coatings applications
Designed to operate well in harsh and intensive environments
Simple maintenance and comfortable to use
설명
기술 데이터
장비
액세서리
키트
기술
시장
성능
Performance
1 Constant performance whatever the conditions: Potential icing, high humidity, and extreme temperatures
2 Fast pump changeover design to eliminate pulsation during spraying
3 SST hydraulic section as standard (not carbon steel) compatible with new water-based coatings
3 Minimal dead zones: Efficient and fast flushing (ideal for hot-potted 2K materials)
Productivity
4 Large 2in suction hose assembly to handle higher viscosities up to 30,000 cps (optional)
5 Minimum downtime with quick hydraulic and foot valve knockdown and easy access to upper sealing
6 Protected lubrication cup to prevent material contamination
7 Storage compartment for convenient and easy access to accessories
8 Easy to operate convenient gravity hopper (optional)
Sustainability
1 Reduced noise pollution due to an enhanced air motor exhaust/muffler design
9 Innovative throat packing design with self-adjusting V-packing seals for longer life (no manual packing gland adjustment required)
♦ Designed with fewer components for less inventory and user-friendly maintenance.
생산성
4 Large 2in suction hose assembly to handle higher viscosities up to 30,000 cps (optional)
5 Minimum downtime with quick hydraulic and foot valve knockdown and easy access to upper sealing
6 Protected lubrication cup to prevent material contamination
7 Storage compartment for convenient and easy access to accessories
8 Easy to operate convenient gravity hopper (optional)
지속가능성
1 Reduced noise pollution due to an enhanced air motor exhaust / muffler design
9 Innovative throat packing design with self-adjusting V-packing seals for longer life (no manual packing gland adjustment required)
♦ Designed with fewer components for less inventory and user-friendly maintenance.
| 설명 | 값 |
|---|---|
| Maximum Air Pressure (bar) | 6 |
| Maximum Air Pressure (psi) | 87 |
| Fluid Output at 20 cycles / mn (gal/min) | 0.84 |
| Fluid Output at 20 cycles / mn (l/min) | 3.2 |
| Fluid Output at 60 cycles / mn (gal/min) | 2.5 |
| Fluid Output at 60 cycles / mn (l/min) | 9.6 |
| Free Flow Rate (gal/min) | 2.5 |
| Free Flow Rate (l/min) | 9.6 |
| Number of cycles per liter of products | 6 |
| Pump displacement (cc/cycle) | 160 |
| Pump displacement (in^3/cycle) | 9.8 |
| Depth (in) | 16.7 |
| Depth (mm) | 425 |
| Height (in) | 44.5 |
| Height (mm) | 1132 |
| Width/depth (in) | 12.5 |
| Width/depth (mm) | 317 |
| Maximum Material Pressure (bar) | 432 |
| Maximum Material Pressure (psi) | 6264 |
| Pressure ratio | 72/1 |
| Air Consumption (m3/h) | 124 |
| Weight (kg) | 60.4 |
| Weight (lbs) | 133 |
| Maximum Temperature (°C) | 60 |
| Maximum Temperature (°F) | 140 |
| Power Source | 공압 |
| Air Inlet Fitting | F 3/4" BSP |
| Material Inlet Port | M 1 1/4" G |
| Material Outlet Port | M3/8" NPSM / F 3/4" BSP |
| Wetted Parts | 경질 크롬 스테인리스 스틸, 폴리에틸렌, 스테인리스 스틸 303, 텅스텐 카바이드 |
| Certification | II2G Ex h IIA T2...T4 Gb X |
| Motor Type | 스위치 유형 |
| Pump Type | 볼이 있는 컵 펌프 |
| Pumping technology | 컵 피스톤 펌프 |
| Sound Level (dbA) | 77.2 |
| 설명 | 부품 번호 | Material inlet | Drum size (L) | Air Regulator fluid pressure | Drain Rod | Pump output Filter | Setup | Suction accessory | Type of seal |
|---|---|---|---|---|---|---|---|---|---|
| AIRLESS® PUMP 72C160 W/M SST LEATHER/UHMWPE SUC 200L FILT SST | 64350160135111 | M 1" 1/4 BSPP | 200L | Yes | Yes | Yes | 벽면 장착 | 석션파이프ID 23mm | Chevron |
| AIRLESS® PUMP 72C160 MOB SST LEATHER/UHMWPE SUC 30L FILT SST | 64350160131115 | M 1" 1/4 BSPP | 20-40L | Yes | Yes | Yes | 트롤리 | 석션파이프ID 23mm | Chevron |
| AIRLESS® PUMP 72C160 W/M SST LEATHER/UHMWPE SUC 30L FILT SST | 64350160131111 | M 1" 1/4 BSPP | 20-40L | Yes | Yes | Yes | 벽면 장착 | 석션파이프ID 23mm | Chevron |
| AIRLESS® PUMP 72C160 SST LEATHER/UHMWPE BARE | 64350160130000 | M 1" 1/4 BSPP | 200L | Bare | - | Chevron | |||
| AIRLESS® PUMP 72C160 W/M SST LEATHER/UHMWPE SUC 30L W/O FILT | 64350160131101 | M 1" 1/4 BSPP | 20-40L | Yes | 벽면 장착 | 석션파이프ID 23mm | Chevron | ||
| AIRLESS® PUMP 72C160 MOB SST LEATHER/UHMWPE HOPPER FILT SST | 64350160134115 | M 1" 1/4 BSPP | Yes | Yes | Yes | 트롤리 | 20L 호퍼 | Chevron |
| 설명 | 부품 번호 |
|---|---|
| POLYAMIDE 500B HOSE RANGE WITH NPSM FITTINGS | 050500X0X |
| TIPTOP AIRLESS® REVERSIBLE TIP CALIBER XXXX | 00040XXXX |
| MAGMA HEATER RANGE | 1561600XX |
| PTFE 500B HOSE RANGE WITH NPSM FITTINGS | 050500X5X |
| KIT 2ND GUN (SFLOW™, HOSE, WHIP AND FITTINGS) | 151590016 |
| SUCTION HOSE 1"1/4 L=600M | 149597200 |
| PRIMING ASSEMBLY FOR PUMPS 52C225 AND 72C160 | 151590012 |
| SST FILTER 500 BARS I-M3/4",O1-M3/8 NPSM,O2=PLUG-W/O SCREEN | 155581456 |
| HEAVY DUTY TROLLEY FOR 52C225 OR 72C160 AZUR PUMPS | 151590700 |
| 20L GRAVITY HOPPER FOR AZUR AIRLESS PUMPS 52C225 AND 72C160 | 125010000 |
| 설명 | 부품 번호 | Spray gun | Hoses length (in) | Hoses length (mm) | Air Regulator | Suction accessory | Swivel fitting | Whip hose (ft) | Whip hose (m) |
|---|---|---|---|---|---|---|---|---|---|
| PACK 72C160 MOB SST LEATH/UHMWPE SUC30L FILTSST 15+1.6M+SFLOW | 3721603111525 | Sflow™ 470 Standard | 590 | 15 | Yes | 석션파이프ID 23mm | Yes | 5.2 | 1.6 |
| PACK 72C160 MOB SST LEATH/UHMWPE HOPPER FILTSST 15+1.6M+SFLOW | 3721603411525 | Sflow™ 470 Standard | 590 | 15 | Yes | 20L 호퍼 | Yes | 5.2 | 1.6 |
| PACK 72C160 MOB SST LEATHER/UHMWPE SUC30L PRIM 15+1.6M+SFLOW | 3721603171525 | Sflow™ 470 Standard | 590 | 15 | Yes | 석션파이프ID 23mm | Yes | 5.2 | 1.6 |
| AZUR 72C160 PE/PTFE SST MOB SUC FILT 15+1.6M+SFLOW UNIV7/8 | 3721603111526 | Sflow™ 470 Universal | 590 | 15 | 석션 파이프 1” | Yes | 5.2 | 1.6 | |
| AZUR 72C160 PE/PTFE SST MOB HOP FILT 15+1.6M+SFLOW UNIV7/8 | 3721603411526 | Sflow™ 470 Universal | 590 | 15 | Yes | 20L 호퍼 | Yes | 5.2 | 1.6 |
관련 제품