Sames | Airmix® Xcite®+ Manual Spray Gun

Description

Product savings & environmental protection
Unsurpassed atomization quality
Ergonomically designed for outstanding performance

Performance

1 Large tip selection with dedicated X-tra Fine Finish tips for water-based material with wide choice of flow rates and fan width patterns
2 Unsurpassed finishing quality and outstanding transfer efficiency with VX24 HVLP aircap
3 Built-in filter with high filtration capacity to avoid tip blockage and minimize pressure loss
♦ Job repeatability with our selection of tips that are individually tested to guarantee a consistent pattern
♦ Diffuser and deflector embedded to decrease the atomizing air consumption and improve atomization

Productivity

4Large amplitude of the fan width adjustment for time savings; no need to change the tip
5New swivel conception for longer lifetime
6 Improved trigger design to ensure the operator's comfort
♦ EZ Adjust Aircap to facilitate the rotation of the head from horizontal to vertical spray
♦ Fluid inlet with or without swivel fitting for low torque effort minimizing operator fatigue

Sustainability

7 Increased operator safety with trigger lock and aircap protection
♦ Anodized body with laser engraving not affected by exposure to solvents
♦ Construction built to last and compatible with all types of materials (even water-based with stainless steel fluid passage and Rulon® sealing)
♦ Double seal technology to prevent aircap leakage and paint return on the air circuit

Sames created Airmix® technology in 1975. Airmix® is an intermediate spray technology that combines the finish quality of Airspray with the productivity of Airless® paint sprayer and is the industrial standard for Air-Assisted Airless® today. The Xcite®+ paint gun from the Sames range, benefits from our latest expertise.

Airmix® spraying technology is the best compromise between productivity and finish quality with the highest transfer efficiency up to 86%, minimizing paint waste, increasing productivity, improving working conditions and preserving the environment.

Benefits per technologies	Transfer efficiency	Atomization quality	Flow rate
Airspray spraying
Airmix® spraying
Airless® spraying

What makes Airmix® paint gun so popular in the industry?

Our Xcite®+ paint gun, formely known as Kremlin® Rexson, has been sold worldwide since its first launching back in 2009. Our Airmix® Xcite®+ paint spray guns range improves a lot the finish quality of your professional paint job projects. They are available with or without swivel fitting for improved maniability and performance. We supply a large number of spray gun kits with hoses and pumps, together with accessories. Our policy is to give you the most easy solutions to improve your performances with our paint gun while reducing overspray.

Airmix® (or Air Assisted Airless® ) gives a high finishing quality & uniform film build control for high productivity on paint flow rates from 400 to 2000 cc/min with a consistent spray pattern to perfectly atomize small to large amount of paints.

Discover why our Airmix® paint gun solution will fit your needs?

Fed by air compressors, Airmix® pumps (with powerful air motors) and paint guns, featuring all set-ups, with accurate fluid pressure regulator control, are ideal for atomizing most products. Our professional pumps can be fed by suction rods or gravity hoppers (cups) to meet any paint jobs. Our cup pumps are available in diiferent powers ranging from high output to smaller productions. Our Flowmax® pump - bellow technology - feeds spray gun with a constant and regular flow and no risk of leakage. Our very flexible fluid and air hoses improves the gun maniability. For any paint gun supplies, contact us.

Xcite®+ Airmix® spray guns deliver a high transfer efficiency up to 86% (HVLP compliant paint sprayer). There are many reasons why transfer efficiency is so important:

Significant paint savings: more paint on finished products and less in the booth
Reduce spray booth maintenance: reduction in overspray (for HVLP spray guns)
Protect the environment: VOC emissions reduced - like an HVLP paint sprayer
Higher level of paint coat uniformity: high-quality coverage and regular film build thickness

Discover our Airmix® manual paint gun range!

Three Airmix® Xcite®+ paint guns are available:

Xcite®+ 120: works with a pump with pressure ratio up to 20/1 - assembled with a stainless steel seat
Xcite®+ 240: works with a pump with pressure ratio up to 33/1 - assembled with a carbide seat
Xcite®+ 400: recommended to apply single adhesive and sealant materials, MS polymers, adhesives, grease and a large range of materials requiring an atomization pressure higher than 240 bar (3480 psi)

For higher operating pressures, please visit our section dedicated to Airless® paint sprayers. For any questions on the use of your Xcite®+ Airmix® paint spray gun, the packaged solutions, paint gun accessories and the number of air caps and tips (nozzles) available, please contact us and we will be happy to assist you in detail!

Our Airmix® technology is also available with the electrostatic effect: our Nanogun+ paint gun!

Depending on the shape of your parts, it may be wise to take advantage of the wraparound effect of electrostatic to optimize the paint recovery without having to touch-up some areas of the parts. It is worth to know that our Airmix® technology is also available with electrostatic effect with our Nanogun Airmix® paint gun.

Technical data table

Designation	Value	Unit: metric (US)
Maximum Fluid Pressure	120 - 240 - 400 (1740 - 3480 - 5400)	bar (psi)
Maximum Air Pressure	6 (87)	bar (psi)
Recommended Air Pressure (min)	0.7 - 3 (11.6 - 43)	bar (psi)
Transfer Efficiency	86	%
Maximum Fluid Temperature	50 (122)	°C (°F)
Air Inlet	M 1/4 NPS
Trigger Lock Safety	♦
Polished Forged Aluminum Body	♦
Stainless Steel, PTFE, Carbide Wetted Parts	♦
Fluid Swivel Fitting (available upon version)	♦
Weight	579 (20)	g (oz)

Equipment

Designation	Pressure	Aircap	Swivel fitting	Seat	Part number
XCITE®+ GUN 120B	120 bar (1752 psi)	VX24	♦	SST	135732100
XCITE®+ GUN 120B	120 bar (1752 psi)	VX24	-	SST	135732120
XCITE®+ GUN 240B	240 bar (3480 psi)	VX24	♦	Carbide	135732200
XCITE®+ GUN 240B	240 bar (3480 psi)	VX24	-	Carbide	135732220
XCITE®+ GUN 400B	400 bar (5840 psi)	VX24	♦	Carbide	135732400

Accessories

Designation	Adjustable fan pattern	Part number
VX24 KHVLP AIRCAP	♦	132720020
NG22 SWIVEL FITTING 500BAR MF1/2JIC		129732425
SWIVEL FITTING NG22 500B M1/4NPS F1/2JIC		129732435

Kits

Designation	Setup	Pump	Pump filter	Suction rod	Hose length	Heater	Gun	Swivel fitting	Aircap	Tip	Part number
XCITE®+ 120	-	-	-	-	7.5 m (24 ft)	-	Xcite®+ 120	-	VX24	-	151260960
XCITE®+ 240	-	-	-	-	7.5 m (24 ft)	-	Xcite®+ 240	-	VX24	-	151260961
XCITE®+ 120 + 15C25	Wall	15c25	-	16 mm ( 0,63'')	7.5 m (24 ft)	-	Xcite®+ 120	♦	VX24	-	151260974
XCITE®+ 120 + 15C25	Wall	15C25	-	-	7.5 m (24 ft)	-	Xcite®+ 120	♦	VX24	-	151260976
XCITE®+ 120 + 15C25	Wall	15C25	-	16 mm ( 0,63'')	7.5 m (24 ft)	-	Xcite®+ 120	-	VX24	-	151261001
XCITE®+ 120 + 15C50	Wall	15C50	-	25 mm ( 1'')	7.5 m (24 ft)	-	Xcite®+ 120	♦	VX24	-	151265050
XCITE®+ 120 + 15C50	Wall	15C50	♦	-	7.5 m (24 ft)	-	Xcite®+ 120	♦	VX24	-	151265052
XCITE®+ 120 + 15C50	Wall	15C50	♦	25 mm ( 1'')	7.5 m (24 ft)	-	Xcite®+ 120	♦	VX24	-	151265053
XCITE®+ 120 + 17F60	Wall	17F60	-	-	7.5 m (24 ft)	-	Xcite®+ 120	-	VX24	-	151260967
XCITE®+ 120 + 20C50	Wall	20C50	♦	25 mm ( 1'')	7.5 m (24 ft)	-	Xcite®+ 120	♦	VX24	-	151260973
XCITE®+ 120 +10C18	Tripod	10C18	-	7 mm ( 0,28 '')	7.5 m (24 ft)	-	Xcite®+ 120	-	VX24	06.094	151665740
XCITE®+ 120 +10C18	Tripod	10C18	-	7 mm ( 0,28 '')	7.5 m (24 ft)	-	Xcite®+ 120	-	VX24	06.094	151665760
XCITE®+ 120 +10C18	Tripod	10C18	-	7 mm ( 0,28 '')	7.5 m (24 ft)	-	Xcite®+ 120	-	VX24	06.094	151665770
XCITE®+ 120 +10C18	Wall	10C18	-	-	-	-	Xcite®+ 120	-	VX24	-	151665700
XCITE®+ 120 +10C18	Wall	10C18	-	-	7.5 m (24 ft)	-	Xcite®+ 120	-	VX24	06.094	151665730
XCITE®+ 120 +10C18	Wall	10C18	-	straight - 16mm	7.5 m (24 ft)	-	Xcite®+ 120	-	VX24	06.094	151665780
XCITE®+ 240 + 30C25	Wall	30C25	-	16 mm ( 0,63'')	7.5 m (24 ft)	-	Xcite®+ 240	♦	VX24	-	151260975
XCITE®+ 240 + 30C25	Wall	30C25	-	-	7.5 m (24 ft)	-	Xcite®+ 240	♦	VX24	-	151260977
XCITE®+ 240 + 30C25	Wall	30C25	-	25 mm ( 1'')	7.5 m (24 ft)	-	Xcite®+ 240	♦	VX24	-	151260978
XCITE®+ 240 + 30C25	Wall	30C25	-	25 mm ( 1'')	7.5 m (24 ft)	-	Xcite®+ 240	-	VX24	-	151261002
XCITE®+ 240 + 34F60											151260970
XCITE®+ 240 + 40C50	Wall	40C50	♦	16 mm ( 0,63'')	7.5 m (24 ft)	-	Xcite®+ 240	♦	VX24	-	151260968
XCITE®+ 240 + 40C50	Wall	40c50	♦	25 mm ( 1'')	7,5 m (24 ft)	♦	Xcite®+ 240	♦	VX24	-	151260969
Xcite®+ 240 + 35C50	wall	35C50	-	25 mm ( 1'')	7.5 m (24 ft)	-	Xcite®+ 240	♦	VX24	12.11	151148400
Xcite®+ 240 + 35C50	wall	35C50	♦	25 mm ( 1'')	7.5 m (24 ft)	-	Xcite®+ 240	♦	VX24	12.11	151148450

Kits for North America

Designation	Setup	Pump	Suction	Hose length	Gun	Tip	Part number
Xcite®+ 120 + 10C18	wall mount	10C18	5 Gal rod (18-125)		None		668-665-750
Xcite®+ 120 + 10C18	wall mount	10C18	5 Gal rod (18/125)	25 ft.	Xcite 120	09-114	668-665-751
Xcite®+ 120 + 10C18	wall mount	10C18	55 Gal rod (18/125)	25 ft.	Xcite 120	09-114	668-665-752
Xcite®+ 120 + 10C18	wall mount	10C18	5 Gal rod (26/125)	25 ft.	Xcite 120	09-114	668-665-753
Xcite®+ 120 + 10C18	wall mount	10C18	55 gal rod (26/125)	25 ft.	Xcite 120	09-114	668-665-754
Xcite®+ 120 + 10C18	wall mount	10C18	5 Gal rod (18/125)	50 ft.	Xcite 120	09-114	668-665-755
Xcite®+ 120 + 10C18	wall mount	10C18	55 Gal rod (18/125)	50 ft.	Xcite 120	09-114	668-665-756
Xcite®+ 120 + 10C18	wall mount	10C18	5 Gal rod	50 ft.	Xcite 120	09-114	668-665-757
Xcite®+ 120 + 10C18	wall mount	10C18	55 Gal rod (26/125)	50 ft.	Xcite 120	09-114	668-665-758
Xcite®+ 120 + 10C18	cart mount	10C18	5 Gal rod (18/125)	25 ft.	Xcite 120	09-114	668-665-759
Xcite 120 + 10C18	cart mount	10C18	6 Gal rod (26/125)	25 ft.	Xcite 120	09-114	668-665-760
Xcite®+ 120 + 10C18	cart mount	10C18	5 Gal rod (18/125)	50 ft.	Xcite 120	09-144	668-665-761
Xcite®+ 120 + 10C18	cart mount	10C18	5 Gal rod (26/125)	50 ft.	Xcite 120	09-144	668-665-762
Xcite®+ 120 + 10C18	wall mount	10C18	1 Gal rod	16 ft.	Xcite 120	09-144	668-665-763
Xcite®+ 120 + 10C18	wall mount	10C18	1 Gal rod	25 ft.	Xcite 120	09-144	668-665-764
Xcite®+ 120 + 10C18	tripod	10C18	1 Gal rod	16 ft.	Xcite 120	09-144	668-665-765
Xcite®+ 120 + 10C18	tripod	10C18	1 Gal rod	25 ft.	Xcite 120	09-144	668-665-766
Xcite®+ 120 + 10C18	wall mount	10C18	1 Gal rod (18/125)	25 ft.	Xcite 120	09-114	668-665-767
Xcite®+ 120 + 10C18	stand	10C18	Hopper 120 bar	25 ft	Xcite 120	09-114	668-665-770

Spare Parts

Designation		Part number
PACKAGE OF SEALS PRODUCT PART FOR XCITE®+ GUN		129729901
PACKAGE OF SEALS AIR PART XCITE®+ GUN		129729908
SERVICING KIT FOR XCITE®+ 120 B GUN		129729920
SEAL KIT FOR XCITE®+ 400 B		129729941
SERVICE KIT FOR XCITE®+ 400B		129729943
S/STEEL SCREEN NO 4 PKT FOR MR GUN		129609907
S/STEEL SCREEN NO 6 PKT FOR MR GUN		129609908
S/STEEL SCREEN NO 12 PKT FOR MR GUN		129609909
PACK 10 SEALS FOR S/S AND CARBIDE SEATS FOR JX-MX-MRX-XCITE®		129629922
PACK OF 10 ACETAL SEATS FOR XCITE®+ GUN		129729904
PACK OF 2 SST SEATS FOR XCITE®+ 120		129729905
SEAT-HOLDER ASSEMBLY (W/O SEAT) FOR XCITE®+ GUN		129729907
SEAT-HOLDER ASSEMBLY (W/O SEAT) FOR XCITE®+		129732907
SERVICING KIT FOR XCITE®+ 240B		129732921

Technologies

Airmix® spray technology

Since 1975, Airmix® combines conventional and high pressure Airless technologies advantages. It is today's industry standard for medium pressure atomization.

HVLP

This compliant technology ensures high transfer efficiency (minimum 65%) with reduced atomizing air pressure of 0.7 bar maxi.

Documents

Select all documents

Xcite™ Airmix®

Format : application/pdf
Size : 457Ko

Select the document

Airmix® Catalog 2020 Sames

Format : application/pdf
Size : 7Mo

Select the document

General Catalog (only for North American market) Sames

General Catalog North America

Format : application/pdf
Size : 3Mo

Select the document

Xcite+ & Xcite+ Light Launching File (for NA only)

Format : application/pdf
Size : 3Mo

Select the document

Airmix Tip Chart (for NA only)

Format : application/pdf
Size : 282Ko

Select the document

Instruction Manuals

Select all documents

Xcite+ Xcite+ Light Airmix | User manual

Format : application/pdf
Size : 3Mo

Select the document

Materials

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Anti-Corrosion Water-Based

Some anti-corrosion materials are available in water-based versions. These green paints have a longer dry time, but meet most environmental requirements & have excellent protective qualities.

Anti-Corrosion Epoxy Multi-Component

The Anti-Corrosion Epoxy Multi-Component product is highly resistant to marine & industrial environments, buried conditions, ground water, effluents, salt water & a wide range of oils & chemicals.

Anti-Corrosion Epoxy Zinc

Zinc coatings when applied to blasted steel provide excellent anti-rust spray coating corrosion protection, weathering protection & very good resistance to salt water & solvents. Inorganic zinc coatings provide excellent anti-rust corrosion protection when used in chemical plants, refineries & coastal or offshore installations. This coating can provide even better corrosion protection when a top coat is applied. Inorganic zinc coatings are compatible with epoxies, phenolics, acrylics, silicones & many other coatings.

Anti-Corrosion Epoxy Free Solvent

Solvent-free epoxy coatings are designed for long-term protection of steel & concrete structures against corrosion, abrasion & chemical attack. Operating temperature ranges from –40F to 1040F.

Anti-Corrosion Polyurethane Multi-Component

A two-component efficient coating product, used as first layer on metallic surfaces & in a wide range of painting systems. Forms an excellent quality anti-corrosive polyurethane film, ensuring the adherence between the surface & the next layer of the painting process.

Anti-Corrosion Epoxy

Anti-Corrosion Epoxy is applied for active anti-corrosive & anti-rust protection of iron & steel surfaces that are to be coated. It is extremely hard & resistant to friction. It is particularly resistant to diluted acids, alkalis, petroleum products, some solvents, water, sea water, and more.

Anti-Corrosion Epoxy High Solid

Used for the steel structures of steel pipeline, steel frame, bridge & plant facilities for effective, long-term substrate protection.

Anti-Corrosion Polyurethane

Polyurethane coatings are often used for the corrosion protection of steel because they are particularly economical to apply. They dry quickly & can therefore be over-coated in short intervals. They can also be applied independently of the weather conditions & are resistant to impact.

CARC Water-Based

Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.

CARC Epoxy Multi-Component

Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

Moisture-Sensitive Polyurethane Multi-Component

Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material 100% Solid

UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.

UV Material Water-Based

Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

UV Material Polyurethane Multi-Component

The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.

UV Material Polyurethane

The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Acid Catalyst Polyurethane Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.

Acid Catalyst Epoxy Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.

Markets

Machine Tools

Protection & finishing applications

Containers

Protective coating for sea containers

Coil Coating

Liquid & powder coating on metallic coils

Molding

High transfer efficiency release agent coating for molding processes

Cab

Protection, finishing, bonding & sealing solutions for cabs

Solar Energy

Bonding & sealing applications for solar panels & cells

Piping

Anti-corrosion & protective coating for piping structures

Handling Machines

Protective & finishing coating for handling & lifting machines

Marine Energy

Protective & anti-corrosion coating for sea power plant machines

Gas Tanks & Bottles

Liquid & powder protective coating for gas bottles & tanks

Wind Energy

Protective coating for windmill parts & components

Steel Drums

Protection, sealing & finishing for steel drums

Kitchen & Bath

Preparation & finishing for kitchen & bath market

Coffins

Bonding & finishing solutions for coffins

Aluminum Extrusions

Finishing & protective coatings

Cranes

Finishing & protective solutions

Harbor Lift Equipment

Anti-corrosion protection

Mining Machines

Protection, finishing, bonding & sealing for mining machinery

Steel Profile

High Performance Fluoropolymer liquid paint (PVDF) & powder coating

Forest Machines

Protection & finishing of forest machinery

Earth Moving Machines

Protection & finishing spray applications

Tractors

Protection, finishing, bonding & sealing for tractors

Harvesters

Protection, finishing, bonding & sealing for harvesters

Farming Trailers

Protection, finishing, bonding & sealing solutions for farming trailers

Sprayers

Protection, finishing, bonding & sealing for sprayers

Metallic Furniture

Liquid & powder paint coating for metallic furniture

Truck Cabs

Protection, finishing, bonding & sealing solutions for truck cabs

Railways

Protective coating, sealing & bonding applications for railway vehicles & parts

Cargo & Tankers

Anti-corrosion & protective coating for marine ships

Recreational Vehicles

Bonding & sealing solutions for recreational vehicles

Yachting

Protective & finishing coating for yacht & sea vessels

Bus

Protection, finishing, bonding & sealing solutions for bus

Cruise Ships

Protective coating & finishing for cruise ships

Road Trailers

Anti-corrosion & protective coating for road trailers

Solutions

Airmix® manual spray gun easy solution

This solution is a simple concept - with Airmix® Xcite®+ or Xcite®+ Light spray gun - for one or two painters. The design of the gun reduces the operator fatigue.

1K paint kitchen for several painters

This solution is a simple concept supplying paints & flushing solvent to one or several manual guns.

Airmix® Xcite®+ Manual Spray Gun

DE LAVIE: 40% paint savings and even finish with our Airmix® Xcite spray guns

ART ASIA (india): Our Airmix® equipment have proven their reliability over time

ART ASIA (india): Our Airmix® pumps have proven their reliability over time

ART ASIA (Wood furniture -India): It is so easy to paint with the Airmix® Xcite™ spray gun:

De Lavie Décor - Wood furniture (Brazil): The Airmix® Xcite™ gun brings perfect finish!

HERITAGE Wood furniture (India): 30% paint savings with our Airmix® Xcite™ gun!

HOLMER Professional painter: the Xcite fist well in your hand!

HERITAGE - India - painter

HIMLEKÖK (Sweden): Airmix® spraying quality is a must for our Kitchen cabinets!

Bidones Graells: Outstanding performances for our finishing paint line

High wood finish quality with SAMES KREMLIN Airmix range

The 2K Airmix® spraying system from SAMES KREMLIN is awesome!

Our XCITE™ Airmix® spray gun is user-friendly | Bidones Graells

Pellerin Milnor (US) Professional painter testimony

Airmix® customer benefits

PËLLERIN MILNOR Vice President testimony

SCHROEDER Professional painter: I love my gold Xcite Airmix® spray gun

Performance

Productivity

Sustainability

What makes Airmix® paint gun so popular in the industry?

Discover why our Airmix® paint gun solution will fit your needs?

Discover our Airmix® manual paint gun range!

Our Airmix® technology is also available with the electrostatic effect: our Nanogun+ paint gun!

Technical data table

Xcite™ Airmix®

Airmix® Catalog 2020 Sames

General Catalog North America

Xcite+ & Xcite+ Light Launching File (for NA only)

Airmix Tip Chart (for NA only)

Xcite+ Xcite+ Light Airmix | User manual

Airmix® Xcite®+ Manual Spray Gun

Related videos

DE LAVIE: 40% paint savings and even finish with our Airmix® Xcite spray guns

ART ASIA (india): Our Airmix® equipment have proven their reliability over time

ART ASIA (india): Our Airmix® pumps have proven their reliability over time

ART ASIA (Wood furniture -India): It is so easy to paint with the Airmix® Xcite™ spray gun:

De Lavie Décor - Wood furniture (Brazil): The Airmix® Xcite™ gun brings perfect finish!

HERITAGE Wood furniture (India): 30% paint savings with our Airmix® Xcite™ gun!

HOLMER Professional painter: the Xcite fist well in your hand!

HERITAGE - India - painter

HIMLEKÖK (Sweden): Airmix® spraying quality is a must for our Kitchen cabinets!

Bidones Graells: Outstanding performances for our finishing paint line

High wood finish quality with SAMES KREMLIN Airmix range

The 2K Airmix® spraying system from SAMES KREMLIN is awesome!

Our XCITE™ Airmix® spray gun is user-friendly | Bidones Graells

Pellerin Milnor (US) Professional painter testimony

Airmix® customer benefits

PËLLERIN MILNOR Vice President testimony

SCHROEDER Professional painter: I love my gold Xcite Airmix® spray gun

Related products

Performance

Productivity

Sustainability

What makes Airmix® paint gun so popular in the industry?

Discover why our Airmix® paint gun solution will fit your needs?

Discover our Airmix® manual paint gun range!

Our Airmix® technology is also available with the electrostatic effect: our Nanogun+ paint gun!

Technical data table

Xcite™ Airmix®

Airmix® Catalog 2020 Sames

General Catalog North America

Xcite+ & Xcite+ Light Launching File (for NA only)

Airmix Tip Chart (for NA only)

Xcite+ Xcite+ Light Airmix | User manual

Navigation

Follow us !