40C100
Paint Pump
This paint pump is perfect for Airless applications and provides exceptional performance.
Ideal for Airless applications
High efficiency pump for maximum energy savings
Optimized construction - simple and quick maintenance
Description
Technical Data
Equipment
Accessories
Kits
Documents & Media
Technologies
Markets
Performance
♦ Economical with low air consumption
♦ Quiet air motor to preserve work environment
Productivity
♦ Construction without dead zones for quick flushing & product changes
♦ Mobile seal located on the piston ensures mechanical cleaning of the fluid section's internal wall during pump run
♦ Lower mobile single lip packing (GT) reducing friction delivers improved efficiency
Sustainability
♦ Few parts & simple design ensures extended lifetime
♦ Polyfluid & PTFE graphite seal for improved wear resistance
♦ Triple chrome layer piston for exceptional durability
| Designation | Value |
|---|---|
| Maximum Air Pressure (bar) | 6 |
| Maximum Air Pressure (psi) | 87 |
| Fluid Output at 20 cycles / mn (gal/min) | 0.5 |
| Fluid Output at 20 cycles / mn (l/min) | 2 |
| Fluid Output at 60 cycles / mn (gal/min) | 1.58 |
| Fluid Output at 60 cycles / mn (l/min) | 6 |
| Free Flow Rate (gal/min) | 1.58 |
| Free Flow Rate (l/min) | 6 |
| Number of cycles per liter of products | 10 |
| Pump displacement (cc/cycle) | 100 |
| Pump displacement (in^3/cycle) | 6.1 |
| Depth (in) | 48.5 |
| Depth (mm) | 280 |
| Height (in) | 31.5 |
| Height (mm) | 800 |
| Width/depth (in) | 15.7 |
| Width/depth (mm) | 400 |
| Maximum Material Pressure (bar) | 240 |
| Maximum Material Pressure (psi) | 3480 |
| Pressure ratio | 40/1 |
| Air Consumption (cfm) | 25.4 |
| Air Consumption (m3/h) | 43.2 |
| Weight (kg) | 22 |
| Weight (lbs) | 48.5 |
| Maximum Temperature (°C) | 60 |
| Maximum Temperature (°F) | 140 |
| Power Source | Pneumatic |
| Air Inlet Fitting | F 3/4" BSP |
| Material Inlet Port | F 1/2" SPP / M 26 x 125 |
| Material Outlet Port | M 1/2" JIC |
| Wetted Parts | Hard chrome stainless steel, Polyethylene, Stainless steel 303, Tungsten carbide |
| Certification | CE II 2G T1-T3 |
| Motor Type | Mechanical reversing block |
| Pump Type | Cup pump with balls |
| Pumping technology | Cup piston pumps |
| Sound Level (dbA) | 80 |
| Designation | Part number | Material inlet | Seal | Air Regulator fluid pressure | Lower seal | Setup | Suction accessory | Drain Rod | Pump output Filter |
|---|---|---|---|---|---|---|---|---|---|
| BARE PUMP AIRLESS 40C100 | 151785000 | F1/2" BSPP | Chevron mix Polyfluid/PTFEG | Yes | GT | Bare | - | ||
| AIRLESS PUMP 40C100 W/M W/O FILTER W/O SUCTION | 151785050 | M26x125 | Chevron mix Polyfluid/PTFEG | Yes | GT | Wall mounted | - | ||
| AIRLESS PUMP 40C100 W/M W/O FILTER WITH SUCTION DIAM 25 | 151785100 | M26x125 | Chevron mix Polyfluid/PTFEG | Yes | GT | Wall mounted | Suction rod ID 23 mm | ||
| AIRLESS PUMP 40C100 W/M WITH FILTER W/O SUCTION | 151785150 | M26x125 | Chevron mix Polyfluid/PTFEG | Yes | GT | Wall mounted | Yes | Yes | |
| AIRLESS PUMP 40C100 W/M WITH FILTER AND SUCTION DIAM 25 | 151785200 | M26x125 | Chevron mix Polyfluid/PTFEG | Yes | GT | Wall mounted | Suction rod ID 23 mm | Yes | Yes |
| AIRLESS PUMP 40C100 TROLLEY WITH FILTER & SUCTION ROD Ø 25 | 151785400 | M26x125 | Chevron mix Polyfluid/PTFEG | Yes | GT | Trolley | Suction rod ID 23 mm | Yes | Yes |
| Designation | Part number |
|---|---|
| Two Post Cart w/o plate | 051221000 |
| Pump Mounting Plate with straps | 056100199 |
| AIR REGULATOR KIT FOR AIRMIX SPRAYING | 151740200 |
| SST Suction rod Ø23 plunging tube length elbowed 570 mm M26x125 | 149596150 |
| SST Suction rod Ø23 plunging tube length 1000mm elbowed (for 200 liters drums) M26x125 | 149596160 |
| Stainless steel drain rod Ø16 elbowed F18 x 125 | 049596000 |
| Fluid filter 3/8 Mesh 12 | 155580400 |
| Designation | Part number | Aircap | Details | Spray gun | Tip | Hoses length (mm) | Air Regulator | Pump type | Suction accessory | Swivel fitting | Hoses | Whip hose (m) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PACK AIRLESS 40C100 W/M+D22 ROD+PRIMING+SFLOW 517 TIP+HOSES | 151265202 | For reversible tip | Prime kit | Sflow 275 4F | 14-13 | 7.5 | Yes | Wall mounted | Suction rod ID 23 mm | Yes | Yes | 1.6 |
| PACK AIRLESS 40C100 MOB SUCT ROD PRIM D25 SFLOW 275 12-13TIP | 151265203 | For reversible tip | Prime kit | Sflow 275 4F | 14-13 | 7.5 | Yes | Trolley | Suction rod ID 23 mm | Yes | Yes | 1.6 |
| PACK 40C100 PUMP + SFlow®275 GUN | 151265205 | For reversible tip | Filter | Sflow 275 4F | 14-13 | 7.5 | Yes | Trolley | Yes | Yes | 1.6 | |
| MOB KIT AIRLESS 40C100 SUC+FILT+SFLOW7/8-275 4F TIPTOP1413 | 151265019 | For reversible tip | Filter | Sflow 275 4F Universal | 14-13 | 7.5 | Yes | Trolley | Suction rod ID 23 mm | Yes | Yes | 1.6 |
| KIT 40C100, MOB, FIL, SUC, SFLOW 7/8 TIP TOP 14-13, HOSE 10M | 151785600 | For reversible tip | Filter | Sflow 275 4F Universal | 14-13 | 10 | Yes | Trolley | Suction rod ID 23 mm | Yes | Yes |
Documents PDF
-
product-40C100-airless-piston-pump_en_GB.pdf
-
product-40C100-airless-piston-pump_en_US.pdf
Documents Instruction Manuals
-
40C100 | User manual
Documents 3D/2D
-
3D file 40C100
-
3D file 40C100
Airless technology
Let's get in touch-
What is Airless spraying?
Learn more about Airless here!Airless technology sprays paint at high pressure to ensure fast and efficient coverage, making it ideal for large surfaces.
-
What are the benefits of Airless technology?
Contact us to find out how Airless can optimize your production.Airless is the simplest paint system, requiring minimal adjustments. It provides rapid application and can quickly cover large areas.
-
When should I use Airless spraying?
Talk to our specialists to see if Airless is right for your needs.Airless is perfect for large-scale projects, such as wall painting or anti-corrosion protection of metal structures.