Airless® manual spray gun easy solution for one painter

This solution is a simple concept supplying paint to one painter.
Airless application
Airless application

Complete Solutions to Ensure

PERFORMANCE
  • Very high pressure pump to be able to work with a long hose length with powerfull atomizing pressure
  • Fast motor inversion to avoid pulsation
PRODUCTIVITY
  • Large hydraulic section for maximum paint flow
  • (3) filtration levels to the gun outlet to avoid tip blockage
  • Maneuverable cart for any work site
SUSTAINABILITY
  • Full sized wheels that avoid puncturing
  • Adapted sealing cartridge for larger choice of material

Airless SFLow spray guns layout examples

image

SFlow® Airless spray gun solutions can use different pump technologies and fluid sections sizes

You will be able to choose the right solution depending on your production specific needs: small to intensive production type of material used (viscosity as an example)....

BUSES-AIRLESS-STANDARDS
(1) Airless flat spray tips

The SFlow® spray gun must be fitted with our genuine Airless®  spray tips to guarantee the best finish quality, minimum overspray, and pattern repeatability.

You must choose the right tip required for thickness and fan width pattern. To help you select your spray tip, please refer to the tip configurator. Flat tips are recommended for most paints and usual works

"Tips and Tricks":  At the end of the day, we recommend that you place your tip in a closed solvent bucket for easy cleaning.

tip-top buse
(1) Airless Tiptop spray tips

The SFlow spray gun must be fitted with our genuine TipTop Airless®  spray tips to guarantee the best finish quality, minimum overspray, and pattern repeatability.

You must choose the right tip required for thickness and fan width pattern . To help you select your spray tip, please refer to the tip configurator. We recommend our TipTop reversible Airless® tips for high solid content paints since it is very easy to unplug the tip if this occurs.

"Tips and Tricks":  We recommend that you position the tip as for improved security.

Skill tip new design
(1) Airless Skill spray tips

The SFlow Airless spray gun must be fitted with our Skill tips (double inserts) when Airless® spraying under low pressure is recommended (80 to 150 bars)

You must choose the right tip required for thickness and fan width pattern. To help you select your spray tip, please refer to the tip configurator. You have the choice between our Fine Finish tips dedicated for solvent-based paint or X-tra Fine Finish tips dedicated to water-based paints. The spaciel design with a double insert prevents any plugging during intensive use.

"Tips and Tricks":  At the end of the day, For paints difficult to flush, we recommend that you disassembly the tip  and place the two parts in a closed solvent bucket for easy cleaning.

SFlow manual Airless gun
(2) SFlow® Airless manual spray gun

The SFlow® Airless manual spray gun delivers high level performance with unsurpassed finish quality. 

We recommend using the SFlow Airless® gun manual spray gun when handling:

  • high solid content paints 
  • high rich zinc primers.

"Tips and Tricks": The gun comes with a built-in filter at the handle.  We recommend you choose a filter with a screen lower or equivalent to the one of the pump filter. When using long product hose length, we recommend to use a whip end to increase the handiness of the gun.

product airspray hose
(3) Hoses

You will need to select the right length of hoses between the paint pump and the spray gun depending on your installation and your spray booth location. You will also need to select the right diameter to avoid too much pressure loss. (pressure loss will directly impact the fluid section size of the pump needed). As an example, with water-based paints with a viscosity of 100 cps, a 7.5 meters hose, diameter 6.35, will generate a 0.5 bar pressure loss.

"Tips and Tricks": For moisture sensitive paints, you will need to choose PTFE hoses.

	40C50 Airless Paint Pump
(4) Cup lub Airmix® paint pump

This cup lub pump range represents an economical production/price ratio. Those pumps are dedicated for solvent and water-based paints.

Our Sames pump range features fluid sections made of stainless steel.  This pump is not recommended for moisture-sensitive materials. In case of multiple color changes, we recommend using the smallest hydraulic section which matches your needs to save paint and solvents materials. 

"Tips and Tricks": In the case of very viscous materials, this pump type can be fed under pressure.

 

34F60 Airless Flowmax®
(4) Flowmax® Airmix® paint pump

This free lub pump range represents the most robust paint pump in the world. Our Sames Flowmax® bellows pump range is dedicated for abrasive and moisture sensitive solvent or water-based materials. 

The fluid section is made of stainless steel. This pump is not recommended for multiple color changes.

"Tips and Tricks":

  •     In case of viscous materials, you should never exceed 0,5 bar feeding pressure.
  •     Never use  a check valve integrated on the suction rod (you may damage the Flowmax® bellow) .

Pumps selection criteria table to help you choose the right pump which will meet your needs

Modular conception

Modular conception

This solution is modular and fits all your needs to:

  • Supply paint to an other operator
  • Select other hose length
  • Mount a gun extension
  • Feed the pump from a bigger drum
  • Agitate the material