REXSON 2B0227
2 Ball Pump
This High Viscosity Pump is a 2 ball double-acting piston technology is used for Airless® and extrusion application requiring low to medium flow rates.
Robust and reliable
Simple to maintain
Configurable and versatile
설명
기술 데이터
장비
액세서리
문서 및 미디어
기술
시장
성능
Performance
M1 Power distributor: Wide passageway for maximum airflow
L1 Upper Body: The upper part of the pump is of robust construction and must be able to withstand the maximum pressures.
L2 Upper Valve: This valve allows material to pass from the lower chamber to the upper chamber of the pump. It is designed to limit pressure loss.
L3 Lower Valve: This valve is essential for the suction of the product. It is designed to be as wide as possible for easy filling.
Productivity
M2 The Cover: Very easy to remove and to access the repair parts
M3 The Pulse Output: The motor can be easily monitored thanks to an air pulse occurring at each reversal.
L4 Motor adaptation flange: Unique and robust assembly of the motor shaft connection to the pump shaft. Allows quick adaptation to different air motors to vary the pressure ratio of the pump.
L5 Guard: To guarantee the safety of the operators, this guard prevents contact with the moving shaft of the pump.
L6 Lower Body: The pump lower is adapted as needed to be fixed on a follower plate, immersed in a bung drum, or simply threaded for connection to a manifold.
Sustainability
M4 Brass guiding ring: Enduring and accurate guidance system
M5 Camshaft inversion system: Very reliable reversal system
L7 Upper seals packing: Our pump range has a wide range of seal materials to suit all your needs.
L8 Rod and Cylinder: The piston shaft and the cylinder are made of triple chrome steel to ensure excellent abrasion resistance.
생산성
M2 The Cover: Very easy to remove and to access the repair parts
M3 The Pulse Output: The motor can be easily monitored thanks to an air pulse occurring at each reversal.
L4 Motor adaptation flange: Unique and robust assembly of the motor shaft connection to the pump shaft. Allows quick adaptation to different air motors to vary the pressure ratio of the pump.
L5 Guard: To guarantee the safety of the operators, this guard prevents contact with the moving shaft of the pump.
L6 Lower Body: The pump lower is adapted as needed to be fixed on a follower plate, immersed in a bung drum, or simply threaded for connection to a manifold.
지속가능성
M4 Brass guiding ring: Enduring and accurate guidance system
M5 Camshaft inversion system: Very reliable reversal system
L7 Upper seals packing: Our pump range has a wide range of seal materials to suit all your needs.
L8 Rod and Cylinder: The piston shaft and the cylinder are made of triple chrome steel to ensure excellent abrasion resistance.
| 설명 | 값 |
|---|---|
| Maximum Air Pressure (bar) | 6 |
| Maximum Air Pressure (psi) | 87 |
| Fluid Output at 15 cycles / mn (gal/min) | 0.9 |
| Fluid Output at 15 cycles / mn (l/min) | 3.4 |
| Fluid Output at 20 cycles / mn (gal/min) | 1.2 |
| Fluid Output at 20 cycles / mn (l/min) | 4.54 |
| Fluid Output at 60 cycles / mn (gal/min) | 3.59 |
| Fluid Output at 60 cycles / mn (l/min) | 13.62 |
| Pump displacement (cc/cycle) | 227 |
| Pump displacement (in^3/cycle) | 13.9 |
| Maximum Material Pressure (bar) | 480 |
| Maximum Material Pressure (psi) | 7000 |
| Maximum Temperature (°C) | 80 |
| Maximum Temperature (°F) | 176 |
| Air Inlet Fitting | 3/4"BSP(F) |
| Material Inlet Port | 80mm 1-1/2"BSP(F) |
| Material Outlet Port | 1"BSPT(F) |
| 설명 | 부품 번호 |
|---|---|
| - PE - Polyethene (UHMWPE) | SE=03 |
| - PTFEG (PTFE + Graphite impregnated) | SE=05 |
| - Follower plate (Ø=105mm) | FO=FP |
| - PTFE - Polytetrafluorothylene (Teflon like properties) | SE=01 |
| - Motor 9000 (30:1) | MO=90 |
| - Motor 6000 (30:1) | MO=60 |
| - Motor 7000 (18:1) | MO=70 |
| - Wall mounted (Inlet F 1-1/2'' BSPP) | FO=WM |
| - PTFE + FEP (Encapsulated O-Ring: Teflon like properties over Viton or Silicone) | SE=02 |
| - Mixed Materials | MA=CS |
| - Stainless Steel | MA=SS |
| - PU (Polyurethane) | SE=06 |
| - PEEK/PTFEG (PTFE + Glass impregnated) | SE=07 |
| - Reinforced Chromium + Full CB | MA=XS |
| - Leather | SE=04 |
| - Mixed Materials + Carbide valves | MA=SC |
| 설명 | 부품 번호 |
|---|---|
| Wall mounted support for motor 5000 to 9202 | 9015 |
| Double O-Ring Follower Plate for 200L drum -Ø 571 (pump foot Ø80) | 151101600 |
| Flat Seal Follower Plate for 40-60L Drums -Ø 350-360 (pump foot Ø80) | 151100400 |
| Double O-Ring Follower Plate for 30L drum -Ø 285 (pump foot Ø80) | 151101200 |
| Double O-Ring PTFE-Coated Follower Plate for 40-60L drum -Ø 360 (pump foot Ø80) | 151102500 |
| Double columm elevator for 20 to 60 L. drums (not available in NA/China) | 151080500 |
| Flat Seal Follower Plate for 200L Drums -Ø 571 (pump foot Ø80) | 151100500 |
| Double O-Ring PTFE-Coated Follower Plate for 200L drum -Ø 571 (pump foot Ø80) | 151102600 |
| Flat Double Seal Follower Plate for 200L Drums -Ø 571 (pump foot Ø80) | 1055180301 |
| Double O-Ring PTFE-Coated Follower Plate for 30L drum -Ø 315 (pump foot Ø80) | 151102400 |
| Double O-Ring PTFE-Coated Follower Plate for 30L drum -Ø 285 (pump foot Ø80) | 151102200 |
| Double O-Ring PTFE-Coated Follower Plate for 30L drum -Ø 305 (pump foot Ø80) | 151102300 |
| Double column elevator for 200 L. drums (not available in NA/China) | 151090500 |
| Monocolumm elevator for 20 to 60 L. drums (not available in NA/China) | 151080000 |
| Double O-Ring Follower Plate for 20L drum -Ø 280 (pump foot Ø80) | 151101100 |
| Double O-Ring Follower Plate for 30L drum -Ø 305 (pump foot Ø80) | 151101300 |
| Double O-Ring Follower Plate for 30L drum -Ø 315 (pump foot Ø80) | 151101400 |
| Double O-Ring PTFE-Coated Follower Plate for 20L drum -Ø 280 (pump foot Ø80) | 151102100 |
| Flat Seal Follower Plate for 30L Drums -Ø 305 (pump foot Ø80) | 151100200 |
| Flat Seal Follower Plate for 20-30L Drums - Ø 280-285 (pump foot Ø80) | 151100100 |
| Flat Seal Follower Plate for 30L Drums -Ø 315 (pump foot Ø80) | 151100300 |
| Monocolumm elevator for 200 L. drums (not available in NA/China) | 151090000 |
| Double O-Ring Follower Plate for 40-60L drum -Ø 360 (pump foot Ø80) | 151101500 |
스키마 문서
-
product_intec_SH930_1.jpg
