EasyPump
Gear Pump for Flow management
Made of stainless steel, the EasyPump is dedicated to manage the flow of most standard water-borne and solvent-borne paints. The wide range of outputs (from 1,2 to 10cc per revolution) will cover a full range of applications.
Accurate Dosing
Improved Cleaning
Easy Maintenance
설명
기술 데이터
장비
키트
문서 및 미디어
기술
시장
성능
Performance
1 Specifically designed to reduce the gap in gear assembly and give accurate flow for high finishing results
2 Efficient flushing thanks to the bypass block at the rear of the pump
♦ Limited amount of dead zones to allow a faster and easier
Productivity
2 During flushing and loading there is a bypass function around the gearwheels, in parallel to an internal flushing of gearwheels and shafts
3 Same interface between all the pumps for unlimited compatibility
♦ Wide range of outputs from 1,2 to 10cc per revolution
Sustainability
4 Robust transmission shaft, treated and maintained by several bearings and an axial stop
♦ All parts in contact with product are in Stainless Steel
♦ The cleaning process helps to lubricate rotating parts
♦ Maintenance kits (including seals) are dedicated for each type of gearpump
생산성
2 During flushing and loading there is a bypass function around the gearwheels, in parallel to an internal flushing of gearwheels and shafts
3 Same interface between all the pumps for unlimited compatibility
♦ Wide range of outputs from 1,2 to 10cc per revolution
지속가능성
4 Robust transmission shaft, treated and maintained by several bearings and an axial stop
♦ All parts in contact with product are in Stainless Steel
♦ The cleaning process helps to lubricate rotating parts
♦ Maintenance kits (including seals) are dedicated for each type of gearpump
| 설명 | 값 |
|---|---|
| Maximum Air Pressure (bar) | 6 |
| Maximum Air Pressure (psi) | 90 |
| Maximum Fluid Output (cc/min) | 800 |
| Maximum Fluid Output (cfm) | 0.03 |
| Minimum Output (cc/min) | 30 |
| Minimum Output (oz/min) | 1 |
| Maximum Material Pressure (bar) | 15 |
| Maximum Material Pressure (psi) | 220 |
| Air Inlet Fitting | 2.7x4 |
| Certification | II 2 G Ex h IIA T4 Gb |
| Nominal maximum rotation speed (rpm) | 80 rpm |
| Pump Type | 기어 펌프 |
| Pumping technology | 기어 펌프 |
| 설명 | 부품 번호 |
|---|---|
| Pump EasyPump 10CC (Equipped with bypass bloc) | 270000161 |
| Pump EasyPump 6CC (Equipped with bypass bloc) | 270000160 |
| Pump EasyPump 4.5CC (Equipped with bypass bloc) | 270000159 |
| Pump EasyPump 3CC (Equipped with bypass bloc) | 270000158 |
| Pump EasyPump 2.4CC (Equipped with bypass bloc) | 270000157 |
| Pump EasyPump 1.2CC (Equipped with bypass bloc) | 270000156 |
| 설명 | 부품 번호 |
|---|---|
| Retrofit kit to install "EasyPump" instead of "H" Pump | 910032532 |
| Retrofit kit to install "EasyPump" instead of "FCG" Pump | 910032530 |
| Retrofit kit to install "EasyPump" instead of "Easyrincing" Pump | 910032528 |
| Retrofit kit to install "EasyPump" instead of "Compact" Pump | 910032527 |
PDF 문서
-
product-easypump-gearpump_ko_KR.pdf
관련 제품
정전기
연락하기-
정전기는 모든 경우에 적용되나요?
맞춤형 솔루션을 원하시면 문의하세요!정전기 스프레이는 금속 부품과 같은 전도성 표면은 물론 대부분의 목재 소재에도 매우 잘 작동합니다. Sames는 여기서 더 나아가 특정 플라스틱과 같이 전도성이 낮은 기판에도 정전기 스프레이를 적용할 수 있는 전문성을 갖추고 있습니다. 모든 프로젝트에는 고유한 특성이 있습니다.
-
정전기 벨이란 무엇인가요?
정전기 벨은 페인트를 효율적으로 도포하는 데 사용되는 고정밀 회전식 스프레이 도구입니다. 고속 회전과 정전기가 페인트를 표면 전체에 고르게 분산시켜 낭비를 최소화하고 탁월한 마감 품질을 제공합니다. 성능, 미관, 재료 절약을 모두 충족하는 이상적인 솔루션입니다.