Airspray FPro manual gun easy solution

• Large choice of projectors for flow adjustments and different spray shapes
• High transfer efficiency up to 78%

• All inclusive mobile mobile version allows you to hang the hoses and gun on the cart for maximum mobility
• Choice of several types of pumps and pressure tanks to meet every specific application need.

• Durable wheels
• Maintenance is optimized by the number of spare parts with easy disassembling

Sames's knowhow will ensure you the best quality projectors for the best application results. 

Our CONV and compliant HVLP, LVLP aircaps will answer your requirements in terms of transfer efficiency, spray finishing and speed of application.

Make sure to take into account the required flowrate, pattern size and your material viscosity when selecting your projectors,

The FPRO P pressure gun benefits from the Vortex and Restrictor technologies and provides to all painters a perfect finishing. 

The patented restrictor creates a pressure loss and allows regulators and pumps to work in their optimal working conditions 

With our patented Vortex, the spray pattern is better distributed, resulting in a more homogeneous spray.

The FStart P spray gun ensures a good quality finish at a entry level price.

The FStart P can be used by both beginners and experienced professionals giving a desired high-quality finish.

PMP150 is our easiest pumping solution. It is a diaphragm pump (for application requiring a 1:1 ratio) and can be used with adhesive, medium viscosity or harsh coating.

"Tips and Tricks": You need to operate this pump with a clean air - without any condensation -  it is why we recommend the use of an epurator on the air circuit.

During the flushing operation, always open wide the fluid regulator for a better cleaning of the fluid passage recessed areas. The suction rod need also to remain in the solvent.

This cup lub pump range represents an economical production/price ratio. Those pumps are dedicated for solvant and water-based paints.

Our Sames pump range features fluid section stainless steel This pump is not recommended for moisture-sensitive materials. In case of multiple color changes, we recommend to use the smallest hydraulic section which matches your need to save paint and solvents..

"Tips and Tricks": In case of very viscous materials, this pump type can be fed under pressure.

You should select the size of your pressure pot according to your application and paint. Example, for touch-up works, we recommend you use the 2 liters capacity tank. For water-based paints, we recommend to use a stainless steel tank fitted with an agitator and a bottom outlet.

"Tips and Tricks": For large capacity pressure pots, you can fit several propellers on the agitator rod.

The main filtration can be done at the paint pump using a dedicated filter mounted at the product output of the paint pump. The filter screen need to be adjusted depending on your paint to prevent tip blockage when spraying.

We supply two different types of filters:

• the inline filter which requires a very small amount of solvent for flushing sequences
• the filter accumulator which is the one which is usually mounted on our pumps.

"Tips and Tricks": Place the filter with the vessel oriented on the top to be used as an accumulator

Allows you to pump the material directly from a drum container. Different suction hose diameters are available regarding the viscosity of the paint. We supply suction rods for drums with a capacity of 60 liters and 200 liters.

"Tips and Tricks": Even if the suction rod is not a wear part, we recommend you check it daily as the strainer is not plugged. Always keep a couple extra strainers in stock!

In case of small production runs, we recommend you use our 6 liter hopper to feed the pump.

Tips and Tricks": During the flushing sequence, we recommend you spray with the gun on the inner hopper wall for easier cleaning and to save a maximum amount of solvent.