에어스프레이 오일 조절기 - 수동 구동 및 통합 파일럿

통합 파일럿이 장착된 수동 구동 조절기는 일정한 압력을 유지할 수 있다. 이 조절기를 사용하는 것이 매우 높은 작동 정밀도를 얻는 가장 좋은 방법이다. 제품 압력을 지속적으로 제어함으로써 지속적인 생산 품질을 보장한다. 저점도 재료에서 중점성 재료용으로 설계됨.

매우 높은 정밀도 조절
매끈한 유체 통로 디자인 덕분에 쉬운 플러싱
압력 게이지와 함께 제공됨

구매 하기

Airspray fluid regulator - manual -integrated pilot

Associated informations
- 서술
- 설비
- 부속
- 기술
- 파일
- 재료
- 시장 부야

서술

매우 높은 정밀도 조절
매끈한 유체 통로 디자인 덕분에 쉬운 플러싱
압력 게이지와 함께 제공됨

성능

♦매우 높은 작업 정밀도: 압력제어를 통해 일정한 흐름 보장
♦대 원자화를 위한 펄스 자유화: 궁극의 Sames 다이어프램 설계

생산력

♦쉬 플러싱: 데드 존 없음
♦제품절약

지속 가능성

♦모든 종류의 제품과 호환 가능: 스테인리스강 디자인
♦이상적인 규제 범위에서 작동하므로 최적화 Sames 다이어프램 지속 가능성

통합 파일럿이 장착된 이 수동 드라이브는 매우 정밀한 압력 제어가 가능하여 높은 작동 정밀도로 이어진다. 그것은 우리의 다이어프램 펌프 PMP150에 표준으로 장착된다.

기술 자료표

명칭	수치	단위
무게	1.6 (3.5)	kg (lbs)
흡입 압력 최대값	10 (144.9)	bar (psi)
출구 압력 - 조절된 범위	0.5 (7.2) - 4 (58)	bar
최대 작업 온도	50 (122)	°C
높이	20 (7.9)	cm (in)
지름(대형 통로)	0.9 (0.4)	cm (in)
습식 부품 - 스테인리스강, PTFE, 카바이드	♦
제품 최소 유량(대형 통로)	0.2 (0.1)	l/mn (gal/mn)
제품 최대 유량(대량 통로)	1.5 (0.4)	l/mn (gal/mn)

설비

Designation	SST ball	Pressure gauge	Fluid inlet	Fluid outlet	Part number
Manual regulator with integrated pilot large passage	Ø 9	♦	M 1/4 BSP + (M18x125 or M3/8 NPS or M3/8 BSP)	F 1/4 BSP	155610060

부속

Designation	Details	Part number
BRACKET - REGULATOR & PURIFIER 1/4	Bracket to fix the regulator	016200010

기술

규정 원리

파일

Select all documents

Catalog Airspray Range Sames (English version)

Format : application/pdf
Size : 14Mo

Select the document

General Catalog (only for North American market) Sames

General Catalog North America

Format : application/pdf
Size : 6Mo

Select the document

재료

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Enamel Water-Based

Enamel paint air dries to a hard, typically glossy finish, and is used for coating surfaces that are outdoors or otherwise subject to hard wear or temperature changes.

Water-Based Stains

Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.

Solvent-Based Stains

A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.

CARC Water-Based

Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.

CARC Epoxy Multi-Component

Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

Moisture-Sensitive Polyurethane Multi-Component

Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material 100% Solid

UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.

UV Material Water-Based

Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

UV Material Polyurethane Multi-Component

The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.

UV Material Polyurethane

The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

산성 촉매 폴리우레탄 다성분

멀티 컴포넌트 에폭시산 촉매(AC) 시스템은 건조/경화를 위해 경화제 또는 촉매가 필요하며, 화학 반응이 완료될 때까지 바인더의 경화 과정을 시작하고 유지함으로써 작동한다. 용제는 화학반응이 일어나기 전에 옻칠, 페인트 또는 필러로 마무리된다. 촉매는 습기에 민감하며 Flowmax® 기술 보호가 필요하다.

산성 촉매 에폭시 다중 성분

Multi-Component Epoxy Acid Catalyzing (AC)시스템은 건조/경화를 위해 경화제 또는 촉매가 필요하며, 화학 반응이 완료될 때까지 바인더의 경화 과정을 시작하고 유지함으로써 작동한다. 용제는 화학반응이 일어나기 전에 옻칠, 페인트 또는 필러로 마무리된다. AC 제품의 경화 시간은 열을 가하면 극적으로 빨라질 수 있다.

Metallic Epoxy

The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.

Metallic Water-Based

Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.